AquaTouch wet and dry electric shaver

TripleTrack blades, Pivoting & Flexing Heads, SmartClean AT928/26

Troubleshooting

When should I replace the Jet Clean System fluid?

For hygiene reasons, refill the Jet Clean System once you've used it about 15 times. If you use the system less than 3 times a week, refill it once a month.

How to refill the Jet Clean System

1) Simultaneously press the release buttons on both sides of the Jet Clean System (1) and lift it off the cleaning chamber (2).

2) If there is any remaining fluid in the cleaning chamber, simply pour it down the sink. Rinse the cleaning chamber under the tap.

Note: The cleaning chamber is not dishwasher-proof.

3) Fill the cleaning chamber with HQ200 cleaning fluid to a level between the two lines. Some Jet Clean Systems only have a MAX indication and no MIN indication. Fill the cleaning chamber of these Jet Clean Systems up to MAX.

4) Place the Jet Clean System back on the cleaning chamber. Make sure that the release buttons click back into place.

Refilling the Jet Clean

The information on this page applies to the following models: AT928/26 , AT928/16 , RQ1195/22 , RQ1275/17 , RQ1295/23 , RQ1285/17 , AT891/16 , AT940/20 , AT890/17 , PT860/15 , PT870/15 , PT920/19 , PT920/22 , RQ1160/22 , RQ1280/17 , RQ1260/17 , RQ1160/17 , RQ1280/22 , RQ1260/22 , RQ1250/17 , RQ1180/17 , RQ1290/23 , RQ1050/16 , RQ1050/18 , RQ1060/20 , RQ1075/22 , RQ1095/22 . more less

Not what you are looking for?