PerfectCare Azur Steam iron

Steam 45g/min;200g steam boost, T-ionicGlide soleplate, Safety Auto off + Anti-calc, Safe for all ironable garments GC4913/30

Troubleshooting

The iron does not become hot (enough)

Step 1. Ensure appliance is connected to the mains and switched on. You should see the power indicator light up.

Step 2. Set the temperature above 'oo'.

Step 3. After 2 to 3 min, the iron soleplate should be hot.

In case the wrinkles are not easy to remove, the garment may not be moist enough. Kindly wet the garment slightly and adjust temperature dial up to a hotter position.

If the above does not work, kindly contact a Philips representative in your area for assistance.

The information on this page applies to the following models: GC4913/30 , GC7520/02 , GC6530/02 , GC8350/02 , GC6540/02 , GC7420/02 , GC8560/02 , GC9140/02 , GC8460/02 , GC7330/02 , GC6430/02 , GC7240/02 , GC8280/02 , GC8030/02 , GC8030/08 , GC8080/02 , GC8080/08 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.