1
Products

PerfectCare Compact Plus Steam generator iron

Max 6.5 bar pump pressure, Up to 430g steam boost, 1.5L detachable water tank, Carry lock GC7920/20

Troubleshooting

The steam boost in my Philips Steam Iron is not working

If the steam boost of your Philips Steam Iron stopped working, please find our troubleshooting advice below.
 

Steam irons only: The steam boost trigger has not been pressed and released

To activate the steam boost in your Philips Steam Iron, press the steam boost button/trigger.

Note: Steam boost is not available at the 1 dot and 2 dot temperature settings. Set the temperature setting to the 3-dot position and above as shown in the image below. For the iron models with OptimalTemp, you do not need to adjust the temperature setting.
 
The temperature dial of Philips Steam Iron

Steam irons only: The steam boost function has been used too often

When you use the steam boost function of your Philips Steam Iron too often within a short period, the steam boost function will stop working for a while.

In this case, please wait for a couple of minutes until you use the steam boost again.
 

Steam generator irons only: The steam trigger was not pressed twice quickly

To switch on the steam boost in your Philips Steam Generator Iron, press the steam trigger twice quickly. To switch the steam boost off, just press the steam trigger once again.

Did these solutions not solve the issue? Please contact us for further assistance.

The information on this page applies to the following models: GC7920/20 , GC2145/29 , GC2678/39 , GC8962/40 , GC5031/20 , GC6804/20 , GC9324/20 , GC8712/00 , GC7710/20 , GC9642/60 , GC6602/20 , GC7635/30 , GC6602/21 , GC7031/20 , GC7035/20 , GC8651/10 , GC3803/30 , GC3811/70 , GC3811/80 , GC3820/20 , GC3821/70 , GC4512/20 , GC4521/00 , GC4522/00 , GC8642/20 , GC9550/02 , GC8635/02 , GC9540/02 , GC9240/02 , GC9140/02 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.