Pure tasting water, from ambient to piping hot
First ever Multi-Temp Reverse Osmosis Tap Water Station certified to Australian standards. Equipped with Aquaporin Inside™ water purification technology and integrated heating. Freshly purified water at your desired temperature, instantly.
See all benefitsPure tasting water, from ambient to piping hot
Aquaporin RO technology, tested to NSF58 (TDS)
Harnessing the power of nature. This reverse osmosis system uses a biomimetic membrane with aquaporin proteins — the same proteins found in nature that help water pass through cell membranes. It effectively filters out harmful substances down to 0.0001 micron. Aquaporin Inside™ technology, developed by Aquaporin A/S (Denmark), has been tested in collaboration with NASA and the European Space Agency (ESA) for use in space missions—demonstrating outstanding innovation, reliability, and performance.
Precision Meets Convenience. The elegantly designed smart faucet combines form and function, featuring a durable ABS plastic and zinc alloy housing. It integrates both the system control unit and purified water outlet into one sleek interface. Easily select from seven temperature settings (ambient, 45°C, 55°C, 65°C, 75°C, 85°C, 95°C) and four dispensing volumes (240 ml, 500 ml, 1000 ml, or continuous flow). The 120° swivel design offers flexible positioning, making it exceptionally user-friendly for everyday use.
In Australia, all plumbing and drainage products must be installed by a licensed plumber - and may only be installed if they carry WaterMark certification. This Philips Tap Water Station is fully certified to meet the latest Australian and New Zealand standards: AS/NZS 3497:2021 – Drinking water treatment systems, and AS/NZS 3498:2020 – Water heaters and hot water storage tanks. Certification is provided by CSA Group International, ensuring the product complies with all regulatory, safety, and performance requirements for use in Australian homes.
This system uses continuous flow heating technology to provide instant hot purified water. The internal tank is constantly refilled with purified water, so it never runs empty. It can deliver up to 1.5 L of water above 90°C continuously. The temperature is maintained between 92°C and 95°C, reheating in 20-second cycles as needed. Energy-efficient, it uses ≤0.5 kWh per 24 hours to maintain temperature (when idle). The tank is made from 316L low-carbon stainless steel for excellent strength and corrosion resistance.
This system is tested to reduce Total Dissolved Solids (TDS) by over 95%, in compliance with NSF/ANSI Standard 58 for point-of-use reverse osmosis (RO) systems. The smart faucet displays real-time TDS levels, giving you visible assurance of water purity with every glass. Certified by CTI International and SGS Group, the system meets rigorous standards for material safety, structural integrity, and filtration performance. In addition to TDS reduction, it has been tested to filter out over 110 potentially harmful substances, including chloride, microplastics, fluoride, PFOA, and PFOS.
Always Fresh, Always Pure. TDS creep occurs when reverse osmosis systems are unused for a period, allowing total dissolved solids to slowly pass through the membrane, temporarily raising the TDS level in the purified water. The Philips FreshPro™ system prevents this by automatically flushing the system with purified water — even during standby periods. This proactive flushing reduces TDS creep and ensures the first glass of water is just as pure as the last.
Traditional RO systems are often inefficient, typically wasting 9 to 12 litres of water for every 3 litres of purified water produced — a recovery rate of just 20%. This level of water waste is a concern, particularly in regions facing water shortages. In contrast, the Philips cartridge used in this RO water station achieves 65% water recovery: it produces 2 litres of purified water with only 1 litre of water going to the drain, offering a more sustainable and efficient filtration solution.
Traditional home reverse osmosis (RO) systems typically filter water at just 50 gallons per day (GPD)—around 0.13 L/min. To compensate for the slow flow, they often require a separate storage tank for purified water. However, this can take up space and poses a risk of bacterial contamination in stored water. This Philips Water Station uses advanced 800 GPD technology to deliver a fast flow rate of 2.1 L/min. This enables a tankless design, saving space and ensuring fresh, clean water on demand—without the risk of “secondary pollution.”
This system has been independently tested by CTI International in accordance with NSF/ANSI Standard 58, which evaluates point-of-use (POU) reverse osmosis systems. The certification covers: material safety, structural integrity, TDS (Total Dissolved Solids) reduction, product documentation and performance. The system achieved a TDS reduction of over 95%. It is also certified by CSA Group International to NSF/ANSI Standard 372, confirming lead-free compliance for all materials in contact with drinking water.
This advanced system delivers a high water purification capacity of 800 gallons per day (GPD), supporting an instant filtration flow of 2.1 L/min for both ambient and heated water. Designed to meet the needs of larger households, it provides continuous, on-demand purified water without requiring a separate storage tank—saving space and ensuring water is always fresh.
The 5-layer filter cartridge (Philips AUT609R800/00) is tested to keep its performance for at least 6,000 liters of water purification. Recommended to replace after 2 years of usage. A filter lifetime indicator on the smart faucet will remind you when the cartridge is nearing the end of its lifetime and should be replaced.
Filtration performance
5 in 1 filter: up to 24 months
Yes
down to 0.0001 microns
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Purified water only
Yes
Yes
Yes
Filter specifications
6000L
800 GPD RO membrane
5-stage
Filtration performance
5 in 1 filter: up to 24 months
Yes
down to 0.0001 microns
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Purified water only
Yes
Yes
Yes
Filter specifications
6000L
800 GPD RO membrane
5-stage
General specifications
455*171*425 mm
AUT609R800
2.1L/min
5-38 °C
65%（2:1）
120W
0.1-0.4 Mpa
With filter lifetime reminder
Municipal tap water
Tankless
Included
With TDS display and filter lifetime reminder
Instant heating
220-240
Vertical installation only