We strongly advise you to flush the appliance after every use to prevent dirt from accumulating and bacteria from growing inside (see video).
Note: If you do not flush the appliance after every use, this may lead to an unpleasant smell.
The dirty water tank should also be cleaned after every use to prevent the growth of bacteria and an unpleasant smell. If you have flushed your appliance and it remains dirty, you can clean each part separately.
The diagram on image a shows how each part can be cleaned.
Note: The mopping brushes are not washing-machine proof.
Cleaning the clean water tank more thoroughlyFor extra thorough cleaning, you can pull up the floater attached to the lid of the dirty water tank. This enables you to rinse the bottom of the sieve and the floater properly (see image b).
Tip: You can also place the dirty water tank in the dishwasher.
Cleaning the mopping brushes more thoroughlyThe mopping brushes are cleaned when you flush your AquaTrio after use. If the brushes are still dirty after flushing, you can remove them from the nozzle and clean them with warm or cold running water.
Cleaning instructions (see image c):
- Lift the mopping brushes out of the mopping nozzle by their lime green grips.
- Clean the mopping brushes by rinsing them with running water. If you want, you can use a liquid household cleaner or some washing up liquid.
- Put the mopping brushes on the clean mopping brush cover to dry. Drying can take approximately 24 hours.Note: To ensure proper drying, place one end of the brushes on the rim of the mopping brush cover.
- Replace the brushes. Make sure the mopping brushes are dry when they are placed into the appliance. If they are not dry, the active protection system may be activated when you switch on the appliance because the brushes encounter a too heavy resistance due to still being too wet.