Purifying excellence from ice-cubes to boiling hot
Winner iF Design Award 2025. This Water Station combines water purification, heating, chilling and ice-cube making in one device. It provides pure, mineral-enriched water and ice on demand, with water temperatures ranging from 5°C to 100°C.
See all benefitsPurifying excellence from ice-cubes to boiling hot
Aquaporin Inside™ removes 110 kinds of substances*
Harnessing the power of nature. This reverse osmosis system uses a biomimetic membrane with aquaporin proteins — the same proteins found in nature that help water pass through cell membranes. It effectively filters out harmful substances down to 0.0001 micron. Aquaporin Inside™ technology, developed by Aquaporin A/S (Denmark), has been tested in collaboration with NASA and the European Space Agency (ESA) for use in space missions—demonstrating outstanding innovation, reliability, and performance.
World’s first! This water station produces bullet-shaped, crystal-clear ice cubes using freshly purified water. Every 8 minutes, a new batch of 8 ice cubes is formed. The insulated box holds up to 80 cubes. Creation of the first batch will take about 25 minutes. In a 25°C room, with the ice box closed, the machine is designed to automatically restart the ice making cycle approximately 1 hour after the ice melted sufficiently. It will take about 10 hours for all ice to melt in the ice box (assuming 25°C room temperature).
Powerful compressor chills the purified water from 25°C to a crisp 5°C in just 24 minutes and the innovative chilled water chamber is designed to maintain its low temperature for an impressive 150 minutes, or 2.5 hours, before requiring another brief (approx. 5-minute) cooling cycle. So you can enjoy truly ice-cold purified water on demand.
True boiling (100°C is achieved inside the heating element) instant heating technology delivers purified hot water within seconds. Multiple temperatures available: chilled, ambient, 45°, 55°, 85°, 100°C.
UV-C LED technology in the chilled water chamber activates every hour, inhibiting bacteria growth in the freshly filtered water by up to 99.99%**. When you deactivate the cooling system, the UV sanitization will also stop. Leaving standing water in the chilled water chamber without UV sanitization can create a breeding ground for bacteria, especially as temperatures rise. To ensure the quality and safety of your drinking water, it is essential to drain the system according to the provided instructions.
In the final stage of purification, essential minerals — calcium (Ca²⁺), magnesium (Mg²⁺), potassium (K⁺), and sodium (Na⁺) — are added back into the water. This process not only restores beneficial minerals but also raises the pH level, making the water mildly alkaline. While taste preferences vary, the added minerals help reduce the “flat” taste often associated with highly purified water.
Traditional RO systems are often inefficient, typically wasting 9 to 12 litres of water for every 3 litres of purified water produced — a recovery rate of just 20%. This level of water waste is a concern, particularly in regions facing water shortages. In contrast, the Philips cartridge used in this RO water station achieves 75% water recovery: it produces 3 litres of purified water with only 1 litre of water going to the drain, offering a more sustainable and efficient filtration solution.
Reverse Osmosis filtration separates clean water (permeate) from contaminants (reject water). Since portable water stations are not plumbed in, the rejected water is recycled back into the tap water tank. Sensors continuously measure the level of total dissolved solids (TDS) in the water, both before and after the filtration. The user will be warned to empty and then refill the water tank when needed.
You can always find a suitable water volume to fill your cups, mugs, bottles, or even jugs.
The dispenser will start to work as soon as you connect the power and turn it on. No need to plumb in.
The filter lifetime indicator reminds you to replace the filter on time, to ensure the best filtration performance.
6L large water tank is perfect for family use, without the need of refilling it frequently.
When there is little/no water left, the system automatically prevents hot water from dispensing, protecting the system from dry burn.
After you return from holiday, simply activate the self-cleaning mode to rinse the water pipes with hot water, so that you feel more confident about the hygiene of the system.
Bottled water takes a significant toll on the environment, and also costly. With this water filtration system, you never need it again - you always have access to clean and fresh-tasting water.
Filtration performance
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
75% (3:1)
Down to 0.0001 micron
Yes
Yes
6-stage
Yes
Cooling Performance
2.4L per hour
Compressor cooling
R600a
Down to 5℃
1.0L
Filtration performance
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
75% (3:1)
Down to 0.0001 micron
Yes
Yes
6-stage
Yes
Cooling Performance
2.4L per hour
Compressor cooling
R600a
Down to 5℃
1.0L
Filter specifications
AQP RO filter: up to 12 months
ADD583
General specifications
2000L
220V~ / 50Hz
Municipal tap water
270*430*455 mm
5-38 °C
2100W
LED
Yes
1.4L
6L capacity
Instant heating
Made in China
0.1-0.4MPa
Yes