1
0

Shopping cart

There are currently no items in your shopping cart.

    Get exactly the support you need
    Looking for specific solutions for your product?

    My L'OR Barista machine is not dispensing coffee

    If no coffee or only a few drops of coffee are coming from the spout of your L'OR Barista coffee machine, you can often easily solve this issue yourself. Find out how.

    Not enough water

    Make sure you always fill the water tank with enough water to make your selected coffee.

    Water tank not positioned correctly

    Make sure that the water tank is correctly placed onto the coffee machine.

    Coffee dispensing spout cap is missing

    Make sure that the coffee dispensing spout cap is placed onto the coffee outlet by following these steps:
    1. Remove the coffee outlet by pulling it straight down
    2. Reassemble the two parts. Make sure that the coffee dispensing spout cap is placed onto the coffee outlet
    3. Place the coffee outlet back onto your coffee machine.

    Coffee outlet is dirty

    1. Remove the coffee outlet by pulling it straight down
    2. Disassemble the coffee outlet and rinse all parts with water or clean using the dishwasher
    3. Reassemble all parts and place back onto the machine.
    Clean the spout and spout lid

    Build-up of limescale

    The internal circuits might be clogged up with limescale, which could block the water flow. Descale your coffee machine regularly to prevent this from happening.

    Note: The lungo and ristretto button will start flashing after brewing to tell you it is time to descale your machine. You can find the descaling instructions in the Quick Start Guide that came with your L'OR Barista coffee machine.

    Did this not solve the issue? Please contact us for further help.

    Coffee capsule is not pierced

    If you are using a small or normal-sized coffee capsule in your machine, it could be that it is not pierced. To solve this issue, follow the steps below:
    1. Open the lever and insert a (used) L'OR Barista XXL capsule
    2. Close the lever and open it again to reset the piercing mechanism
    3. Now insert the new small or normal-sized capsule  
    In case the above steps do not solve the issue or it continues to occur with an XXL capsule as well, please contact us for further help. 

    Our site can best be viewed with the latest version of Microsoft Edge, Google Chrome or Firefox.