Flash audio player

Flash audio player

128MB* SA230/00C

Troubleshooting

My RUSH player is locked up and stuck at voice mode

Please follow the steps below to download and upgrade the latest firmware to your RUSH Digital Audio Player. 1. Go to our support site, enter the model number and then download the zipped file under firmware upgrade - software to a temporary directory in your PC. 2. Extract the zipped file. 3. Uninstall your existing driver at Start > Programs > Philips RUSH Audio Player (64MB) or Philips RUSH Audio Player (128MB) > Uninstall. 4. Restart your computer. 5. Run the setup.exe application to reinstall the driver. 6. Click NEXT to continue and YES to accept the terms of use to complete the installation. 7. At Start > Programs > Philips RUSH Aduio player (64MB) or Philips RUSH Audio player (128MB) click Recovery. 8. The computer will prompt you to connect the RUSH player. 9. Remove the battery from the battery compartment of your RUSH player. 10. Connect the player to your PC. 11. Press and hold the PLAY button while inserting a fresh battery into the player. Continue holding down the PLAY button for another 5 seconds. 12. An update screen will pop up. Uncheck the QUICK DOWNLOAD box and click START to upgrade the firmware of your unit. 13. Please take care not to interrupt or unplug the player from the computer while the firmware upgrade is in progress. 14. Once the upgrading process is complete, you may click on the removal icon on the task tray to stop and eject the player. When a message saying the USB device can now be safely removed from the system appears, click OK. The unit should now be able to resume.

The information on this page applies to the following models: SA230/00C .

Not what you are looking for?

Did we answer your question?

If not, contact us.