Azur Performer Plus Steam iron

Steam 45g/min;190g steam boost, SteamGlide Plus soleplate, Safety Auto off + Anti-calc, 2400 Watts GC4517/20

Troubleshooting

My Philips iron doesn't heat up and a light is flashing

If you notice your iron doesn't heat up and a red or blue light blinks, please read about it here.

The iron is in Auto Switch-Off

If your iron is left unused horizontally for more than 2 minutes, or vertically (on the heel rest) for more than 8 minutes, it switches off automatically for safety reasons.

When this happens, the red or blue automatic shut-off light flashes.

Pressing any button will turn the iron on and it will start heating up again.

After approx. 2 min. it will be ready for ironing.

If your iron is a pressurised steam generator (GC90xx): once you hear 2 beeps and the light on the active steam selection button stops flashing and stays on, you can start steam ironing by pressing the steam trigger (see chapter 'Using the iron' in the user manual).

The information on this page applies to the following models: GC4517/20 , GC4519/30 , GC4527/01 , GC4522/01 , GC4514/30 , GC9642/60 , GC4512/20 , GC4521/00 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.