MiniVac Handheld vacuum cleaner

MiniVac Handheld vacuum cleaner

4.8V battery, Bagless Cyclonic, Crevice, brush tool, squeegee, Wet & Dry FC6142/71

Troubleshooting

How to clean the filter of my Philips MiniVac

To maintain optimal suction performance, we advise you to clean the filters every 2 to 4 weeks.

Quick cleaning:

  1. Hold the appliance over a dustbin, press the dust compartment release button and remove the dust compartment.
  2. Turn the rattle inside the filter holder a few times.
  3. Reattach the dust compartment.
Quick cleaning

Thorough cleaning:

  1. Remove the filter unit from the dust compartment.
  2. Remove the outer filter and inner filter from the filter holder.
  3. Clean the inner filter and the outer filter with a brush or with a normal vacuum cleaner if they are very dirty.
    Note: If necessary, you can clean the inner filter and the outer filter in cold or lukewarm water. Dry the inner and outer filter thoroughly before you use the filter unit again.
  4. Reattach the inner filter and the outer filter to the filter holder. Put the filter unit back into the dust compartment.
Thorough cleaning

The information on this page applies to the following models: FC6142/71 , FC6148/71 , FC6148/01 .

Not what you are looking for?

Did we answer your question?

If not, contact us.